Separate pressurized solar water heater:
Model: FD-SP-02
The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.

Heat pipe spilt pressurized solar water heater working principle:
1. When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by heat exchanger in the
Water tank.
4. In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device.
5. If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically.

Solar heating system features:
1. Collector separates with the storage tank. The tank can be put anywhere of the house.
2. The collector can be put on both tilted roof and flat roof
3. Module design, arbitrary combination, harmony with the building perfectly
4. Intelligent control and automatic operation
5. Anti-freeze: No water inside the tubes when it works
6. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
7. Multifunction: Bathing, washing, domestic heating
8. Workable at anytime and enjoyable

The main components of the split Solar Heating System:
1. Solar collector
2. Pump station including:
3. Circulation pump,
4. Check valve,
5. Intelligent controller with sensors,
6. Brass connector
7. Solar storage tank from 100L to 500L

Solar heating system applications:
1. Domestic, industrial and commercial heating use
2. Suitable for open or closed Loop (glycol-water)
3. Space heating
4. Caravan Parks, Hotels, Schools, Public Showers/Kitchens, Restaurants
5. For large scale water heating